 |
| Quantity: | |
|---|---|
YZT3632
YZT3632
THE BEST MINING TRUCK BY WEICHAI
Weichai wide-body mining truck is developed on the basis of integrating the whole Group’s gold powertrain resources (Weichai Engine, Fast Transmission and Hande Axle), and special design focusing on the requirement of mining industry. Weichai mining truck is the only one passed torque test on the five-Axis drum test bench and the truck has the advantage of high reliability, high loadbearing, overloading starting and high gradeability. So after the mining truck enter into the market, their market share at home and abroad keeps increasing, and their reputation among global users keeps improving.
High Reliability
Gold powertrain system, special design for mining conditions
Integral high-strength single-beam and double-layer flexible frame, making the gravity center vehicle lower and lessening impacts of complex working condition
Back-blowing air filter reduces engine wear
High Loadbearing
Hande 35 tons axle specially designed for mining, the largest bearing capacity in the same class models
The newly designed front and rear suspension with reinforced leaf spring, front suspension with slide structure+ four leaf spring U-shaped clip design, rear suspension with V-type eight-thrust rod balance shaft
Thickened 14.00-25 engineering special tires with a larger load capacity
High-strength and wear-resistant steel body
High Productivity
Good product quality, Intelligent powertrain and driving system improve the transportation and mine management
efficiency Statistical vehicle attendance rate is above 96%
Low Use Cost
Patented powertrain technology and continuous performance optimization make the fuel consumption lower
Scientific and professional complete solution suitable for working condition, make maintainance and service cost lower
Mining Truck Weichai Mining Truck YZT3632 - China Best Mining Truck specification
| ||
| YZT3632 Mining Truck | |
| SENTA | |
| 6x4 | |
|
| |
| , Unilateral driving cab, with A/C | |
| WD12.375 | |
| 276/2200 | |
| 1500 | |
L | 11.596 L | |
m Cargo box | 28m 5800*3000*1600 | |
Lifting cylinder | 172 DeppKaler 172 | |
| FAST(Eaton) 430 | |
|
| |
| 9JSD180 | |
| , | |
|
|
Longitudinal steel spring |
| 13 | |
|
| + |
| 15 | |
|
| 16T |
| | |
| Type/Model | Hande 25-ton double reduction axle |
|
| |
Rating capacity/Ratio | 25T/11.7 | |
| | |
| 14.00-25 | |
| 10.0-25 | |
| Electric three-level dust air filter | |
| 130 | |
|
| 1020 |
| 450x110 | |
|
|
|
|
| |
|
| |
| 600L 600L, Aluminum alloy square tank | |
|
| |
Overall dimensions (L*W*H) (mm) | 9300*3670*4080 | |
| 3800+1550 | |
Track(front/rear)mm | 2512/2500 | |
| 45 | |
| 22000 | |
| 440000 | |
| 66000 | |
| 1 | |
| 35% | |
THE BEST MINING TRUCK BY WEICHAI
Weichai wide-body mining truck is developed on the basis of integrating the whole Group’s gold powertrain resources (Weichai Engine, Fast Transmission and Hande Axle), and special design focusing on the requirement of mining industry. Weichai mining truck is the only one passed torque test on the five-Axis drum test bench and the truck has the advantage of high reliability, high loadbearing, overloading starting and high gradeability. So after the mining truck enter into the market, their market share at home and abroad keeps increasing, and their reputation among global users keeps improving.
High Reliability
Gold powertrain system, special design for mining conditions
Integral high-strength single-beam and double-layer flexible frame, making the gravity center vehicle lower and lessening impacts of complex working condition
Back-blowing air filter reduces engine wear
High Loadbearing
Hande 35 tons axle specially designed for mining, the largest bearing capacity in the same class models
The newly designed front and rear suspension with reinforced leaf spring, front suspension with slide structure+ four leaf spring U-shaped clip design, rear suspension with V-type eight-thrust rod balance shaft
Thickened 14.00-25 engineering special tires with a larger load capacity
High-strength and wear-resistant steel body
High Productivity
Good product quality, Intelligent powertrain and driving system improve the transportation and mine management
efficiency Statistical vehicle attendance rate is above 96%
Low Use Cost
Patented powertrain technology and continuous performance optimization make the fuel consumption lower
Scientific and professional complete solution suitable for working condition, make maintainance and service cost lower
Mining Truck Weichai Mining Truck YZT3632 - China Best Mining Truck specification
| ||
| YZT3632 Mining Truck | |
| SENTA | |
| 6x4 | |
|
| |
| , Unilateral driving cab, with A/C | |
| WD12.375 | |
| 276/2200 | |
| 1500 | |
L | 11.596 L | |
m Cargo box | 28m 5800*3000*1600 | |
Lifting cylinder | 172 DeppKaler 172 | |
| FAST(Eaton) 430 | |
|
| |
| 9JSD180 | |
| , | |
|
|
Longitudinal steel spring |
| 13 | |
|
| + |
| 15 | |
|
| 16T |
| | |
| Type/Model | Hande 25-ton double reduction axle |
|
| |
Rating capacity/Ratio | 25T/11.7 | |
| | |
| 14.00-25 | |
| 10.0-25 | |
| Electric three-level dust air filter | |
| 130 | |
|
| 1020 |
| 450x110 | |
|
|
|
|
| |
|
| |
| 600L 600L, Aluminum alloy square tank | |
|
| |
Overall dimensions (L*W*H) (mm) | 9300*3670*4080 | |
| 3800+1550 | |
Track(front/rear)mm | 2512/2500 | |
| 45 | |
| 22000 | |
| 440000 | |
| 66000 | |
| 1 | |
| 35% | |
