You are here: Home / Products / Other Product / Mining Truck Weichai Mining Truck 41T- China Best Mining Truck

Product Detail

Share to:

Mining Truck Weichai Mining Truck 41T- China Best Mining Truck

Mining Truck Weichai Mining Truck 41T- China Best Mining Truck

Quantity:

Mining Truck Weichai Mining Truck 41T- China Best Mining Truck

Mining Truck Weichai Mining Truck 41T- China Best Mining Truck 


Weichai Mining truck (3)

THE BEST MINING TRUCK BY WEICHAI

Weichai wide-body mining truck is developed on the basis of integrating the whole Group’s gold powertrain resources (Weichai Engine, Fast Transmission and Hande Axle), and special design focusing on the requirement of mining industry. Weichai mining truck is the only one passed torque test on the five-Axis drum test bench and the truck has the advantage of high reliability, high loadbearing, overloading starting and high gradeability. So after the mining truck enter into the market, their market share at home and abroad keeps increasing, and their reputation among global users keeps improving.

High Reliability

  • Gold powertrain system, special design for mining conditions 

  • Integral high-strength single-beam and double-layer flexible frame, making the gravity center vehicle lower and lessening impacts of complex working condition

  • Back-blowing air filter reduces engine wear

High Loadbearing

  • Hande 35 tons axle specially designed for mining, the largest bearing capacity in the same class models

  • The newly designed front and rear suspension with reinforced leaf spring, front suspension with slide structure+ four leaf spring U-shaped clip design, rear suspension with V-type eight-thrust rod balance shaft

  • Thickened 14.00-25 engineering special tires with a larger load capacity

  • High-strength and wear-resistant steel body

High Productivity

Good product quality, Intelligent powertrain and driving system improve the transportation and mine management

efficiency Statistical vehicle attendance rate is above 96%

Low Use Cost

Patented powertrain technology and continuous performance optimization make the fuel consumption lower

Scientific and professional complete solution suitable for working condition, make maintainance and service cost lower


Mining Truck Weichai Mining Truck 41T- China Best Mining Truck specification


VEHICLE   PARAMETER



Driving type 6x4
Overall dimension 8390×2520×4050 mm
Nominal payload 25,500 kg
Minimum turning radius 9000 mm
Kerb weight  15,500 kg
Minimum ground clearence 325 mm
Gross vehicle weight 41,000 kg
Approach angle 29 degrees
Maximum limited speed 49 kmph
Departure angle 51 degrees
Maximum gradiability 30%
Front overhang 1543 mm
Wheel base  3800+1400 mm
Rear overhang 1647mm










ENGINE 

FRONT SUSPENSION
Electronically   controlled,turbocharger and intercooler, 4 cycles
Longitudinal steel leaf   spring with semi-elliptical shape
Model WP10.340E32
rubber dampening blocks
No.of cylinders 6
Number of leaves 10
No.of valves per cylinder  4
Thickness of leaves 18 mm
Emission Eu Stage 2
Width of leaves 90 mm
Displacement 9.726 L


Bore x Stroke 126 x 130 mm
REAR SUSPENSION
Max.Torque@ Speed 1350Nm @ 1100-1600 rpm
Steel spring balanced   suspension support type
Rated Power @ Speed 340HP @ 2100 rpm
Number of leaves 12



Thickness of leaves 25 mm
GEAR BOX

Width of leaves 90 mm
Model RTD-11509C


No.of gear shifts 9 forward +1 reverse
WHEELS AND TYRES
Forward ratios 12.42/8.3/6.08/4.54/3.36/2.47/1.81/1.35/1
Reinforced steel rims to   withstand mining conditions
Reverse ratio 12.99
Tyre Type Bias ply tyre



Tyre Size 12.00-20
FRONT AXLE

Wheel Size  8.5-20
Type welding structure rectangular beam
Total No.of tyres 11
Capacity 9.5 tons





TIPPER BODY
REAR AXLE 

U shape scoop body / Rock   body / Exhaust heated body
Double   reduction, differential locks-inter-wheel and Inter-axles 
Standard Bucket Capacity 19.6 CuM
Ratio 8.88
Thickness of body floor 12 mm
Capacity (Tandem) 32 tons
Thickness of body side panel 10 mm



Length of the internal body 5600 mm
STEERING

Width of the internal body 2300 mm
Assistance type Mechanical recirculating ball   steering gear 
Height of the internal body 1500 mm
Steering ratio 25


Oil pump pressure 17 MPa
LIFTING  HYDRAULICS   SYSTEM



Heavy duty front mounted   telescopic cylinder 
BRAKES

Hydraulic pressure for lifting cylinder 19 Mpa
Service brake Dual circuit brake
Diameter of lifting cyllnder 160 mm
Parking brake  Spring energy storage brake
Length of lifting cylinder 4600 mm
Auxiliary brake Exhaust valve brake


Working pressure 1000 kPa
FUEL TANK
Air tank capacity  150 L
Aluminium fuel tank
Braking Distance <12 m
Capacity 420 L
Parking Ramp(°)  30 degrees (up ramp) /20 degrees   (down ramp) 





CABIN
ELECTRICALS

Specially designed wide   cabin for mining purpose
System Voltage 24 V
 Left mounted, half floating, equipped with   A/C
Battery Capacity 165Ah
Overall heat Insulated   with noise reduction
Alternator Power 2000 W
Spring driver's seat with   adjustment of height,backrest,and seat tilt.



Cabin tilt angle 46 degrees
CHASSIS FRAME 



U-profile   double frame(10+10), made with reinforced high strength steel
INTAKE& EXHAUST SYSTEM
Main longitudinal beam section   (mm) 400x900x20 mm
Multi dust filter mounting on the cabin side
Ladder frame width (mm)  850 mm
Tee Exhaust valve





PRODUCTS

INDUSTRIES

SUPPORT

Copyright © 2020 Guangzhou Hiersun Power Generation Limited. All rights reserved
粤ICP备17064060号 广州市恒至莱信机械设备有限公司
--------------------------------------------------->