Views:3 Author:Site Editor Publish Time: 2018-05-04 Origin:Site
Diesel Generator Operation Manual SYSTEM OPERATION Operation Part 1
Only suitably qualified and experienced personnel should carry out generator set operations. Before operating the system, the operator should become familiar with Section 1 of this manual – Preliminary and Safety instructions - together with the Health and Safety Manual (0908-0110-00). Observe all of the WARNINGS and CAUTIONS at all times.
WARNING: BEFORE OPERATING THE PLANT BECOME FAMILIAR WITH THE EQUIPMENT AND HOW IT IS OPERATED (INCLUDING ALL CONTROLS, MANUALLY OPERATED VALVES AND ALARM DEVICES). SAFE AND EFFICIENT OPERATION CAN ONLY BE ACHIEVED IF THE PLANT IS OPERATED CORRECTLY.
WARNING: CONTACTING HIGH VOLTAGE COMPONENTS CAN CAUSE SEVERE PERSONAL INJURY OR DEATH BY ELECTROCUTION. DO NOT OPEN THE GENERATOR OUTPUT BOX WHILE THE GENERATOR SET IS RUNNING. READ AND OBSERVE ALL WARNINGS AND CAUTIONS IN YOUR GENERATOR SET MANUALS.
Caution:Only technically qualified personnel should open the PCC 3201 front panel. Voltages are present which can cause electrical shock, resulting in personal injury.
Even with power removed, improper handling of components can cause electrostatic discharge and damage circuit board components.
This section describes the operation of the PCC3201 generator set control, covering pre-start checks, starting and stopping, and operating the generator set. The text should be read in conjunction with the System Description, Control System Operation, and the engine manual.
All indicators, control switches/buttons and graphical display are located on the face of the Control Panel as illustrated in Figure 4-1.
To secure maximum performance and reliability from your generator set it is essential that certain components are inspected periodically and, where necessary, maintenance procedures carried out as detailed in Section 6 - Maintenance.