 |
| Quantity: | |
|---|---|
DSE5510
The DSE5110 is an Automatic Start ControlModule designed to automatically start and stop diesel and gas generating sets that include non electronic engines.
The module also provides excellent engine monitoring and protection features.
The module has the ability to monitor under speed, over speed, charge failure, emergency stop,low oil pressure, high engine temperature, fail to start, fail to stop and loss of the speed sensing signal. The module displays fault
conditions on the LCD display and via the LED indicators on the front.
DC SUPPLY
8V to 35V continuous
CRANKING DROPOUTS
Able to survive 0V for 50mS, providing the supply was at least 10V before dropout and supply recovers to 5V
START RELAY OUTPUT
16A DC supply at supply voltage
FUEL RELAY OUTPUT
16A DC at supply voltage
AUXILIARY RELAY OUTPUTS
5A DC at supply voltage
CHARGE FAIL/EXCITATION RANGE
0V to 35V
MAXIMUMOPERATING CURRENT
320mA at 12V, 215mA at 24V
MAXIMUMSTANDBY CURRENT
175mA at 12V, 95mA at 24V
ALTERNATOR INPUT RANGE
15V (L-N) to 333V AC (L-N) absolute maximum
ALTERNATOR INPUT FREQUENCY
50-60 Hz at rated engine speed (Minimum: 15V AC L-N)
MAGNETIC PICK-UP VOLTAGE INPUT RANGE
+/- 0.5V to 70V Peak
MAGNETIC INPUT FREQUENCY
10,000 Hz (max) at rated engine speed
MODULE DIMENSIONS (WXH)
240mm x 172mm
9.4” x 6.8”
PANEL CUT-OUT (WXH)
220mm x 160mm
8.7” x 6.3”
MAXIMUMPANEL THICKNESS
8mm
0.3”
Q: Are these parts Original from Cummins?
A: Yes,Kindly be informed we don't sell counterfeit, and will not reply with counterfeit part rfq.
Q: What information needed for quotation?
A: Engine serial number (ESN), Part name, Part number. Name tag photo ( If any)
Q: Why we cannot just give you the part name?
A: Because for Cummins parts, there is updating all the time, the same part name will result with different items.
Q: What payment you accept?
A: TT and western union, order value below 1000USD transaction via western union, and 1000USD above via TT.
Q: How long will we get the quotation?
A: For CCEC and DCEC engine parts, we reply with 24 hours, and others depending on your part list.
Hiersun Engineers are trained and certified in the latest Power solution knowledge for each market and are able to assist you with engine integration into your specific application. Our engineers and sales representatives will spend time with you to understand your application and provide you with a custom solution to best fit your requirements. Customers benefit from Hiersun Power extensive experience and product knowledge of a variety of markets and can assist you with new product or repower applications.
The DSE5110 is an Automatic Start ControlModule designed to automatically start and stop diesel and gas generating sets that include non electronic engines.
The module also provides excellent engine monitoring and protection features.
The module has the ability to monitor under speed, over speed, charge failure, emergency stop,low oil pressure, high engine temperature, fail to start, fail to stop and loss of the speed sensing signal. The module displays fault
conditions on the LCD display and via the LED indicators on the front.
DC SUPPLY
8V to 35V continuous
CRANKING DROPOUTS
Able to survive 0V for 50mS, providing the supply was at least 10V before dropout and supply recovers to 5V
START RELAY OUTPUT
16A DC supply at supply voltage
FUEL RELAY OUTPUT
16A DC at supply voltage
AUXILIARY RELAY OUTPUTS
5A DC at supply voltage
CHARGE FAIL/EXCITATION RANGE
0V to 35V
MAXIMUMOPERATING CURRENT
320mA at 12V, 215mA at 24V
MAXIMUMSTANDBY CURRENT
175mA at 12V, 95mA at 24V
ALTERNATOR INPUT RANGE
15V (L-N) to 333V AC (L-N) absolute maximum
ALTERNATOR INPUT FREQUENCY
50-60 Hz at rated engine speed (Minimum: 15V AC L-N)
MAGNETIC PICK-UP VOLTAGE INPUT RANGE
+/- 0.5V to 70V Peak
MAGNETIC INPUT FREQUENCY
10,000 Hz (max) at rated engine speed
MODULE DIMENSIONS (WXH)
240mm x 172mm
9.4” x 6.8”
PANEL CUT-OUT (WXH)
220mm x 160mm
8.7” x 6.3”
MAXIMUMPANEL THICKNESS
8mm
0.3”
Q: Are these parts Original from Cummins?
A: Yes,Kindly be informed we don't sell counterfeit, and will not reply with counterfeit part rfq.
Q: What information needed for quotation?
A: Engine serial number (ESN), Part name, Part number. Name tag photo ( If any)
Q: Why we cannot just give you the part name?
A: Because for Cummins parts, there is updating all the time, the same part name will result with different items.
Q: What payment you accept?
A: TT and western union, order value below 1000USD transaction via western union, and 1000USD above via TT.
Q: How long will we get the quotation?
A: For CCEC and DCEC engine parts, we reply with 24 hours, and others depending on your part list.
Hiersun Engineers are trained and certified in the latest Power solution knowledge for each market and are able to assist you with engine integration into your specific application. Our engineers and sales representatives will spend time with you to understand your application and provide you with a custom solution to best fit your requirements. Customers benefit from Hiersun Power extensive experience and product knowledge of a variety of markets and can assist you with new product or repower applications.
