You are here: Home / Product / Industrial Engine / Cummins industrial engine / Cummins Industrial Engine B3.3 74HP 55KW 2600RPM

Product Detail

Share to:

Cummins Industrial Engine B3.3 74HP 55KW 2600RPM

Cummins Industrial Engine B3.3 60-85 Hp 45-63 KW , find complete details about Cummins Industrial Engine B3.3 60-85 Hp 45-63 KW , Cummins B3.3, Cummins engine B3.3, Cummins industrial engine Brand 3.3 - Hiersun Power( A member of Hiersun Group)

Quantity:
  • B3.3
  • Cummins

Cummins Industrial Engine B3.3 74HP 55KW  2600RPM 

Getting the right combination to match your equipment, operating environment and workloads has never been easier. Hiersun Advisor is ready to provide expert assistance with your installation process. Hiersun Stock lots of brand new engine so we can supply with our customer in time and competitive price engine.


Cummins Industrial Engine B3.3 74HP 55KW  2600RPM


 b3.3-tier3-agriculture


  • The B3.3 is built to last, with a cast-iron parent bore block designed for durability and reliability. Every element of the design adds value to the customer, including:


  • Direct injection for increased fuel efficiency, low heat rejection and quicker starts

  • A deep, stiff crankcase with structural ribs for lower noise and increased life

  • An isolated valve cover for reduced noise

  • Optional intake air heater for cold-weather starting

  • Low rotating inertia (30% less than industry average) for reduced vibration

  • Left- or right-side service options for easy maintenance

  • SAE "A" PTO mounting option with engine-mounted, gear-driven designs (Front-mounted crank PTO generates 100% torque for hydraulic applications)



 Cummins Industrial Engine  B3.3 other models 


Engine Model  Advertised hp @ rpm  Peak hp @ rpm  Peak Torque lb-ft @ rpm  Aspiration 
B3.3-85  85 (63) @ 2600  85 (63) @ 2600  224 (304) @ 1600  Turbocharged 
B3.3-80  80 (60) @ 2200  80 (60) @ 2200  224 (304) @ 1600  Turbocharged 
B3.3-75  75 (56) @ 2600  75 (56) @ 2600  224 (304) @ 1600  Turbocharged 
B3.3-74  74 (55) @ 2600  74 (55) @ 2600  181 (245) @ 1600  Turbocharged 
B3.3-65  65 (48) @ 2600  65 (48) @ 2600  158 (214) @ 1600  Naturally Aspirated 
B3.3-60  60 (45) @ 2200  60 (45) @ 2200  158 (214) @ 1600  Naturally Aspirated 

All ratings are intermittent unless otherwise noted.  Additional ratings may be available. 

Cummins Industrial Engine  B3.3 74HP 55KW  2600RPM   application : Agriculture 

The Cummins B3.3 engine brings toughness and reliability to every piece of equipment it powers, from tractors to irrigation pumps.  Its in-line 4-cylinder design has a compact footprint for easy installation.  With ratings from 60 hp (45kW) to 85 hp (63kW) Cummins in-cylinder solution meets Tier 3 and Stage IIIA emissions or Tier 4 Interim emissions below 75 hp (56kW) with both naturally aspirated and turbocharged versions that deliver strong performance.  Single-sided maintenance is just one of many standard features and options that let you customize your B3.3.


Cummins diesel industrial engine  B3.3 74HP 55KW  2600RPM   application : Construction  

The Cummins B3.3 engine brings toughness and reliability to every piece of equipment it powers, from skid steers to telehandlers, forklifts to road compaction, and compressors to ground support equipment the B3.3 meets all your equipment needs.  Its in-line 4-cylinder design has a compact footprint for easy installation.  With ratings from 60 hp (45 kW) to 85 hp (63 kW) Cummins in-cylinder solution meets Tier 3 and Stage IIIA emissions or Tier 4 Interim emissions below 75 hp (56 kW) with both naturally aspirated and turbocharged versions that deliver strong performance.  Single-sided maintenance is just one of many standard features and options that let you customize your B3.3.

Cummins diesel industrial engine  B3.3 options 

■ Refrigerant compressor drive for easier installation

■ Rear Engine PTO SAE “B” featuring 210 N•m

(155 lb-ft) at 1:1 drive ratio

■ Fan height and drive ratios for exceptional installation

flexibility

■ SAE “A” PTO mounting option with engine-mounted

gear-driven designs capable of 110 N•m (82 lb-ft) –

front-mounted crank PTO generates 100% torque for

hydraulic applications

■ SAE #3 or #4 flywheel housings

■ Auxiliary pump drive

■ 10" (254 mm), 10.5" (267 mm) or 11" (279 mm)

clutch interfaces

■ Engine balancer for smooth, more refined running

■ Structural oil pan

■ Remote oil and fuel filters



Cummins diesel industrial engine  B3.3 maintenance 

Turbocharged B3.3 engines require an oil change at 350-hour/3-month intervals, while naturally aspirated models can go 500 hours or 6 months between oil changes.

For complete maintenance information, please consult your Owner's Manual or Operations and Maintenance Manual




Hiersun Engineers are trained and certified in the latest Power solution knowledge for each market and are able to assist you with engine integration into your specific application. Our engineers and sales representatives will spend time with you to understand your application and provide you with a custom solution to best fit your requirements. Customers benefit from Hiersun Power extensive experience and product knowledge of a variety of markets and can assist you with new product or repower applications.



PRODUCTS

INDUSTRIES

SUPPORT

Copyright © 2020 Guangzhou Hiersun Power Generation Limited. All rights reserved
粤ICP备17064060号 广州市恒至莱信机械设备有限公司
--------------------------------------------------->